Accessories

NATURECORE SKIRTING BOARDS

We supply matching skirting boards in the original material for each wood design.

Dimensions: 1,200 mm x 45 mm x 10 mm
Box contents: 10 planks
Product structure: Naturecore, HDF, cork. Click connection on both sides.

NATURECORE INSTALLATION

Check and prepare subfloor in accordance with VOB DIN 18365 for floor covering work.
Check the room climate; room temperature min. +18 °C, subfloor temperature min. +15 °C, relative air humidity max. 65 % and min. 40 %.
Before installation allow the unopened packages of planks to acclimatise at an appropriate temperature in the room in which they will be installed. They should be left for at least 24 hours.
Once opened the boxes he material has to be installed immediately.
Use a chalk line to trace a straight line across the middle of the room. Start laying the planks along this line. Apply the solvent-free dispersion adhesive in accordance with the manufacturer’s recommendations.
Lay the planks on the still wet adhesive base within the time recommended by the manufacturer and immediately rub and press down the floor covering. The planks should be fully abutting, but not forced up against one another. Please pay particular attention that the complete back side of the material is moistened by adhesive.

NATURECORE CLEANING AND MAINTENANCE

Depending on the type of dirt, the floor can be cleaned dry. This reduces the costs of care and is easy on the environment due to the low level of cleaning agents involved.

For heavier soiling, we recommend wet/damp mopping with an alcohol-based or neutral cleaner. Avoid leaving pools of water on the floor.

Please visit our website for detailed cleaning and maintenance recommendations: www.dlw.eu